1FZ-FE Basic Turbo Kit


This is our basic hot-side turbocharger kit for the 1FZ-FE engine in an 80 or 105 Series Landcruiser. It comes with a turbocharger, J-pipe style manifold, all water and oil feed and drain lines and a gasket set.

SKU: N/A Categories: , ,


The brand new HD Auto 1FZ-FE Basic Turbocharger Kit

What’s included in this kit?

  • Genuine Toyota MLS Exhaust Manifold Gasket
  • Genuine Toyota Exhaust Manifold Sealing Rings
  • Turbocharger Oil Drain with Steel and Aluminium AN10 Weld On Fitting
  • New Lower Exhaust Manifold Studs & Nuts
  • PULSAR Next GEN GTX3582 XR6 Style Internally Waste-gated Turbocharger with 5PSI Wastegate
  • Stainless Steel XR6 5 Bolt to 3″ V-Band Dump Pipe with Clamp and Flange
  • Australian Made Stainless Turbocharger Oil and Water Feed Lines
  • 1/8 T-Piece for Factory Oil Sender and Oil Feed
  • HD J-Pipe Style Turbocharger Manifold (Retains Factory Headers)
  • T3 Turbocharger Inlet Gasket
  • All required Hose Clamps
  • All fitting Hardware
  • J-Pipe Fitting guide
  • Raceworks Extreme Duty Turbo Beanie RWM-047 ( OPTIONAL )

Other Items You May Need!

There are a few other items you may need to get the most out of your turbo petrol build! We can supply things like:

  • Direct fit Raceworks Injectors
  • Injector Harnesses
  • ARP Head Studs
  • Walbro Fuel Pumps
  • Intercoolers
  • Fuel Pressure Regulators
  • All Haltech Gear
  • NPC Clutches
  • And Much More!


If it’s not listed on our website, feel free to contact our shop and we can organise any additional items you may require.

Turbocharger Information

  • New Aerodynamic 10 blade billet compressor wheel flow more air over the stock cast or Gen1 11 blade billet wheel.
    New Aerodynamic 9 blade turbine wheel, less weight, lower inertia, and higher flowability.
    Genuine structure and rebuildable dual ceramic ball bearing system.
    Larger 0.72A/R compressor cover with Anti-Surge 4″ inlet.
    Billet actuator with black anodized coating.

Manifold Information

  • Australian designed & hand-crafted in Brisbane, QLD
  • Fully TIG welded
  • High mounted position to show off your brand new HD Auto turbo kit, and keep it away from elements when off-road



Q: What PSI wastegate does it run?

A: It runs a 5 PSI wastegate. To increase the boost pressure, you will have to fit a Boost Controller.

Q: Do I need to run water lines to the turbo?

A: YES. They are water-cooled and must have the water lines hooked up. Failing to do so will void all warranty and significantly reduce the service life of your turbocharger.

Q: My vehicle has aftermarket extractors on it. Will I be able to fit this kit to it?

A: The HD J-pipe is designed to bolt to the factory exhaust manifold/headers on a 1FZ-FE. In order to fit this kit you must use the factory headers or source them if you do not have them.

Note: At times there can be a backorder of this product. We ensure to get every kit out in an extremely timely manner however do occasionally face delays of up to 2 weeks. If you are concerned or have a deadline, please contact us to confirm stock prior to ordering. 


There are no reviews yet.

Be the first to review “1FZ-FE Basic Turbo Kit”

Your email address will not be published. Required fields are marked *