This kit utilises 2 – 3 – 4″ PSR TTG adjustable height front struts with PSR coil springs, spacer style diff drop and extended ball joints. Perfect if you are on a tight budget and want to gain much needed travel. Consider PSRHIL-011 for further travel gains when offroad.NOTE: this is a budget solution, contact with your UCA and coil may occur and require timing of the coil, if boot is damaged no warranty on the ball joint will be offered, also failure of joint can occur. Also Alignment issues may occur if set higher than 2″. Please always check your CV’s for bind with this diff drop compared to an arm style.Please be aware that all kits are dispatched at a height that is set from our experience to the advertised height in the product listing, we cannot be held accountable for variations on vehicles and or the variation of weights of accessories that would require further adjustments of heights once installed. Any height adjustment required to achieve the desired ride height is at the installers discretion and at no way our responsibility.