GU PATROL UNIFILTER

Description

Uni Filter High Flow Air Filter to suit:
Nissan Patrol (1997-2001) GU II 4.5L TB45E
Nissan Patrol (2001-2007) GU VI 4.8L TB48E

*** Important Note ****
DOES NOT INCLUDE BACKING PLATE/LID.
Brand new in the box. Will increase horsepower, throttle response and improve Fuel Economy. **Please note, image is For visual aid only.

Equivalent to: WA1000

Uni Filter Quality Air Filter
Unifilter’s vehicle specific filter for the Nissan Patrol GU is a triple stage replacement for the original OEM filter. The inner stage consists of a support assembly which locates the Uni Filter into the original filter lid This lid will need to be removed from the paper membrane per the instructions below. The second stage foam is a safety layer and acts as a backup for the outer or work layer. This outer or work layer provides the bulk of filtration, filtering down to as low as 3 or 4 microns (paper filters are rated at 30 to 40 microns). Please carefully read the following fitting instructions. If you require assistance, please call Western Filters or contact UniFlow/UniFilter direct.

Features & Benefits:
• Fully serviceable 2 stage elements. • Corrugated outer stage for increased surface area. • Filters down to 4 micron. • Improved power, torque & fuel economy. • Australian made & designed for Australian conditions. • Available for all popular makes and models.

Fitting Instructions:
============
1 Remove original equipment air filter from the air box and heat-off the black filter lid using a heat gun or gas torch.
The original paper filter is held onto the lid with a ‘hot-melt” glue and will detach with the help of a screwdriver
or similar implement once smoke is seen coming from the glued area.
2 Remove any excess glue from the inside of the lid by scratching and wiping clean with petrol or turps.
3 Press the large, flat, black seal into the lid and refit the filter using the original wing nut.
4 For ongoing servicing, refer to the separate service instructions included with this filter.