Description
Blackhawk Upper Control Arms suitable for Lifted D40 D23 Navara & R51 Pathfinder
This is a new quality Blackhawk by Roadsafe Castor Corrected Upper Control Arm Kit (Modified Version 2)
Suitable for:
– Nissan Navara D40, and D23 (NP300) built from 09/2005 onwards.
– Nissan Pathfinder R51 4WD built from 07/2005 to 2012.
These control arms are suitable for vehicles with 30mm to 70mm of lift combined with a maximum 50mm extended strut
Roadsafe “BLACKHAWK” Upper Arms are designed with 3 degrees fixed caster and optimally suited to lifts of 30-70mm
They are finished in dual layer coating including black e-coat and Gloss Black Powder Coat for maximum durability, rust prevention and discreet installation
IMPORTANT NOTE:
D40s can have either 1 or 2 camber adjusting bolts on the lower front control arms
THIS UPPER CONTROL ARM WILL NOT FIT VEHICLES WITH ONE ADJUSTER BOLT
Vehicles with one adjuster bolt have a fixed bolt on the front fork of the lower control arm and an adjustable one on the rear
You can see if you have a fixed bolt on the front by looking under the vehicle from the front
Where the front of the lower control arm is bolted to the chassis it will look like a normal bolt WITHOUT the concentric washer found in the same position on the rear
Both these bolts allow the control arm to pivot on the chassis for up and down suspension travel
Please contact us if you are unsure which you have
Reviews
There are no reviews yet.