3″ DPF BACK EXHAUST FOR TOYOTA 150 SERIES 2.8L PRADO: 08/2020…
PERFORMANCE GAIN: 9KW/13NM
Perfect for towing and long distance driving, Torqit’s Prado 150 Series 2.8L Performance Exhaust is one of the thickest and most durable mandrel bent systems of its kind in Australia. Tried and tested in the toughest of conditions, the exhaust has been designed to enhance the performance of the Prado 150 Series and produce a sporty note.
This 3” DPF back exhaust comes standard with a resonator to maximise the noise output of your vehicle, and is further enhanced by 304 grade stainless steel up to 2mm thick, and a wider diameter than that of the factory exhaust. Fully mandrel bent for maximum flow, the thickness of the steel prevents cracking and deepens the note while minimizing drone. The two-bolt laser cut flanges are also manufactured from 304 grade stainless steel and welded inside and out to withstand rugged terrain.
Bolting directly onto the back of the DPF, Torqit’s 2.8L Toyota Prado Performance Exhaust keeps your vehicle compliant with all warranty and insurance regulations. As the owner of a vehicle fitted with a DPF, no doubt you are aware there are few things which damage a diesel engine quicker than excessive Exhaust Gas Temperatures (EGT’s). The 150 Series Prado exhaust has been developed to lower these EGT’s by improving the flow of gases, reducing back pressure, and increasing the engine efficiency and fuel economy.* Torqit’s DPF back exhaust is the ideal alternative to changing the vehicles performance through illegal means such as deleting the DPF.
PERFORMANCE EXHAUST FEATURES
Thick Stainless Steel
An exhaust system is exposed to many varied elements, including extreme heat and rough terrain. To handle these harsh conditions, we use stainless steel that is up to 2mm thick to maintain structural strength even after bending. Being extremely durable and difficult to crack, you can go off-road with peace of mind that your Torqit Performance Exhaust system will stay intact. Steel thickness not only affects the strength of an exhaust system, but also the sound it will produce- the thinner the steel, the tinnier the note. As among the thickest mandrel bent systems available in Australia, Torqit Performance Exhausts produce a deep note without cabin drone. Click here to listen to the sound of cheap vs quality stainless steel.
304 Grade Stainless Steel
The highest quality steel used in exhaust systems is 304 grade stainless, which is renowned for its high strength, corrosion resistance, and easy maintenance. It is known as an austenitic stainless steel, meaning due to a high percentage of chromium and nickel it is extremely resistant to rust, stress, and harsh conditions such as high temperatures. The excellent properties of Torqit’s 304 grade stainless demonstrate its strength in comparison to the 409 grade stainless commonly used in the automotive industry. For heavy duty strength and resistance to corrosion, 304 grade stainless steel is the superior choice. A 4WD owner who undertakes water crossings, backs their vehicle into the water to unload a boat, or lives by the coast will especially benefit from our stainless steel systems.
Internal & External Welds
High quality welds are essential to avoiding structural fatigue on joints, stopping cracks from forming, and preventing exhaust gas leaks. All Torqit Performance Exhausts are TIG welded internally and externally, to reinforce the system for maximum strength. TIG welding is complex and more time consuming than the usual MIG welding technique used on exhausts; however it is a key part of creating a premium system. Torqit’s welds are extremely precise, higher quality, and create a beautiful clean finish with no welding spatter.
Mandrel Bent System
Torqit’s Mandrel Bender uses a flexible mandrel rod to support the pipe internally and prevent crinkling as it is bent. This maintains a smooth and constant diameter, improving the efficiency of your engine. With Torqit’s in house mandrel bender, we can maintain the structural integrity and thickness of our systems, prevent restricted exhaust flow, and reduce back pressure. State of the art programming means each exhaust is precisely replicated to follow the correct path, and guarantees accurate fitment. Check out the Torqit Mandrel Bender in action.
SINGLE EXIT PERFORMANCE EXHAUST INSTALLATION
This Toyota 150 Series Prado Exhaust is a full bolt together system, which comes with detailed fitting instructions. We recommend fitment at a local Torqit dealer, which should take approximately two hours.
- Brushed stainless steel tube up to 2mm thick
- Premium 304 grade stainless steel
- Fully mandrel bent system
- Internal and external welds
- Laser cut 10mm flanges
- Heavy-duty wrap around brackets
- Stainless steel resonator/muffler
- Deep note without cabin drone
- DIY bolt together install
- Ten year product warranty